FILTER SEPARATOR

　　Filter separators are used to remove liquid and solid impurity substances in fuel gas or other non corrosive gasses. Our company offers filter separators which can remove liquid and solid impurity substances in different sizes even minimal of dust or mist.

1. SL Leaf Filter Separator
2. XFS Horizontal Cartridge Leaf Filter Sepqrator
3. YFS Vertical Cartridge Leaf Filter Sepqrator
4. YGF Vertical Cartridge Leaf Filter Sepqrator

1. Designing standard: GB 150-1998 or ASME Ⅷ, div1
2. Structure stype: Horizontal
3. Flange connection: HG or ANSI B16.5

1. High filter separating efficiency
2. Low pressure loss
3. Easy maintenance

1. Shell: Q345R or ASTM A516
2. Flange: 16MnⅡor ASTM A105、ASTM A350
3. Closure removing device: 16MnⅢ or ASTM A105、ASTM A350

1. Closure removing device
2. Drain valve
3. Pressure valve
4. Pressure switch
5. Pressure gauge
6. Level switch
7. Level gauge

1. Maximum working pressure: 1.6Mpa, 2.5Mpa, 4.0Mpa, 6.4Mpa
2. Designing temperature: 60℃
3. Working temperature：-10~60℃
4. Filer separating accuracy: 0.5μm, 1μm, 2μm, 5μm, 10μm, 50μm
5. Filter separating efficiency: ≥99.98%
6. Maximum flowing rate: 1000,000Nm3/h(NG)

Leaf filter separators are the optimized products with high working efficiency, low price and easy maintenance to remove liquid impurity substances in gases and water vapors. Leaf , as the most important component, can be made of carbon steel, stainless steel and aluminum based on different working environments required.

Leaf filter separators are the optimized products with high working efficiency, low price and easy maintenance to remove liquid impurity substances in gases and water vapors. Leaf , as the most important component, can be made of carbon steel, stainless steel and aluminum based on different working environments required.

Experiments demonstrate 97%of liquid impurity substance will be removed by the leaf;the temaining minimal size liquid impurity subsrances will be gradually gathered into bigger size dand fall down into the leaf groove.

Leaf filter sepqrators can not only be used for gas filtering individually but also can be combined with cartridge for more effective applications.

Cartridge Leaf Filter Separator Principle
Three steps of separating process for cartridge leaf filer separator:
Step 1: Gravity separating
Gas flows into the filter body from inlet pipe. With the strong impact toward the shell surface or cartridge frame, impurity substances int big size will be sepqrated;
Step 2: Gcreening holes separating
Rechargeable fitring devices are equipped at the head side of the separator. The type and accuracy level can be chosen with different working requirements. Solid impurity substances in minimal size will be gathered into mist style stuff and removed.
Step 3: Leaf separating leaf sepqrator is remove liquid impurity substance which will be gathered in a proper container inside.

XFS,YFS and YGF cartridge leef filter separators have 100% working efficiency for liquid imqurity substances over 8~10μ and 99.5% working efficiency for dry solid imurity substance over 3μ and 99.5% working efficiency for dry solid impurity substance with 0.5~3μ.

Filter Separator Working Efficiency
Generally, with clean cartridge the total pressure loss can be adjusted from 10kpa to 100kpa, accordingly.