The LQ10/LQ25 series voltage regulator for direct action type two level balance regulator. Widely used for industrial users and commercial users of natural gas, liquefied petroleum gas or other non-corrosive gas transmission and distribution. Built-in filtering. Bleeding valve for overpressure protection device is cut off. Has the advantages of small size and easy installation. The stable pressure responsive and so.

Technical parameters:

The maximum inlet pressure /P1max:6bar Inlet pressure range /δ P1: 0.6-6bar Outlet pressure range of δ P2:15-70mbar / standard type / high-voltage Delta P2:70-300mbar Accuracy of ± 10% /AC: Closing pressure /SG: ≤ 20% The cutting accuracy of ± 5% /AQ: Response time is /ta:≤ 1sec The maximum flow rate ( NG ) /Qmax:70Nm3/h Working temperature: -20~+60 ℃  

Technical parameters:

The maximum inlet pressure /P1max:6bar 

Inlet pressure range /δ P1: 0.6-6bar 

Outlet pressure range of δ P2:15-70mbar / standard type

/ high-voltage Delta P2:70-300mbar 

Accuracy of ± 10% /AC: 

Closing pressure /SG: ≤ 20% 

The cutting accuracy of ± 5% /AQ: 

Response time is /ta:≤ 1sec 

The maximum flow rate ( NG ) /Qmax:70Nm3/h

Working temperature: -20~+60 ℃ 

Connecting dimensions: 3/4 " x 11/4 " ( connecting angle or horizontal ) 

Optional configurations: overpressure cutting, low block, bleeding and other import and export connection size 

Weight: low voltage 2.0kg high voltage type 2.5kg;